IQAuto Repair IQ

2020 Chevrolet Suburban Water Pump Replacement Cost in Kansas City, MO

Hard
60,000–100,000 miles
Updated July 2026

If you need a water pump replacement on your 2020 Chevrolet Suburban in Kansas City, MO, expect to pay between $451 and $687 at a local shop. That breaks down to $160–$242 for parts and $291–$445 for labor at Kansas City's average rate of $102.0/hour. Read on for a full cost breakdown, money-saving tips, and what to watch out for.

Water Pump Replacement2020 Chevrolet Suburban in Kansas City, MO

$451$687

Estimated total cost at a shop in Kansas City

Parts$160–$242

35% of total

Labor$291–$445

65% of total

Time

33.9 hrs

Shop Rate

$102/hr

DIY Saves

~$197

Find the Best Tires at Mavis

Compare tire pricing & book an appointment near you

Get a Quote ->

What's Included in This Repair

  • 1Drain coolant system
  • 2Remove and replace water pump
  • 3Install new gasket and seals
  • 4Replace coolant
  • 5Pressure-test cooling system
Typical Lifespan:
60,000–100,000 miles
Difficulty:
Hard

Warning Signs You Need This Repair

  • Engine temperature gauge rising
  • Coolant puddles under the car
  • Whining or grinding from front of engine
  • Steam coming from under hood

High — overheating causes irreversible engine damage

What Drives the Cost in Kansas City?

Labor Market: Kansas City, MO

Kansas City is a mid-range labor market, with shops charging $102.0–$122.0/hour for labor. For this water pump, you'll pay $291–$445 in labor alone — accounting for approximately 65% of your total bill. Independent shops in Kansas City typically run 20–35% cheaper than dealerships.

2020 Chevrolet Suburban Notes

American-made vehicles like the 2020 Chevrolet Suburban benefit from widely available aftermarket parts, keeping costs competitive. Parts for this repair typically run $160–$242 and are stocked by most auto parts stores. The large network of shops familiar with Chevrolet vehicles also keeps labor competition strong.

DIY vs. Paying a Shop

DIY vs. Professional: Not Recommended for DIY

This repair is not recommended as a DIY project. Difficult DIY requiring draining the cooling system and often removing accessories. Often done with timing belt. The professional rate of $451–$687 is fair for the complexity involved. Attempting this repair without the right training risks damaging other components, costing far more in the end.

Affiliate disclosure: Auto Repair IQ participates in the Amazon Associates Program and other affiliate advertising programs. We may earn a commission on qualifying purchases or referrals at no additional cost to you. Learn more.

5 Ways to Save Money on This Repair

  1. 1Get quotes from at least 3 shops in Kansas City — prices vary by 25–40% between dealers and independents.
  2. 2Ask specifically if they'll use OEM or aftermarket parts. Aftermarket is fine for most components except water pump on luxury brands.
  3. 3Check if your extended warranty or car insurance covers this repair — some aftermarket warranties cover water pump.
  4. 4If your car is near the end of its useful life, compare repair cost ($451–$687) against the vehicle's value.
  5. 5Combine this repair with other deferred maintenance to save on labor — shops often discount when doing multiple jobs at once.

Frequently Asked Questions

In Kansas City, expect to pay $451–$687 total for water pump replacement on a 2020 Chevrolet Suburban. Parts run $160–$242, and labor is $291–$445 (3.0 hours at $102.0/hr).

Compare prices before you commit

Use RepairPal or YourMechanic to get 3 quotes from certified shops in Kansas City in under 2 minutes.

Get Quotes →

Disclaimer: Cost estimates are based on national parts pricing databases and regional labor rate surveys. Actual prices vary by shop, vehicle condition, and parts availability. Always obtain a written estimate before authorizing repairs. Affiliate disclosure: links marked with Amazon may earn us a small commission.