2019 Chevrolet Colorado Timing Belt Replacement Cost in Seattle, WA
If you need a timing belt replacement on your 2019 Chevrolet Colorado in Seattle, WA, expect to pay between $604 and $922 at a local shop. That breaks down to $175–$265 for parts and $429–$657 for labor at Seattle's average rate of $129.0/hour. Read on for a full cost breakdown, money-saving tips, and what to watch out for.
Timing Belt Replacement — 2019 Chevrolet Colorado in Seattle, WA
Estimated total cost at a shop in Seattle
29% of total
71% of total
Time
4–5.2 hrs
Shop Rate
$129/hr
DIY Saves
~$326
What's Included in This Repair
- 1Replace timing belt
- 2Replace tensioner and idler pulleys
- 3Replace water pump (recommended)
- 4Inspect and replace seals as needed
- 5Set engine timing
60,000–100,000 miles — replace on schedule, not when it breaks
Hard
Warning Signs You Need This Repair
- ▸ Ticking noise from engine
- ▸ Engine misfires or runs rough
- ▸ Oil leaks near timing cover
- ▸ Difficulty starting cold
Preventive — don't wait for symptoms. Belt failure = engine destruction
What Drives the Cost in Seattle?
Labor Market: Seattle, WA
Seattle is an above-average labor market, with shops charging $129.0–$149.0/hour for labor. For this timing belt, you'll pay $429–$657 in labor alone — accounting for approximately 71% of your total bill. Independent shops in Seattle typically run 20–35% cheaper than dealerships.
2019 Chevrolet Colorado Notes
American-made vehicles like the 2019 Chevrolet Colorado benefit from widely available aftermarket parts, keeping costs competitive. Parts for this repair typically run $175–$265 and are stocked by most auto parts stores. The large network of shops familiar with Chevrolet vehicles also keeps labor competition strong.
DIY vs. Paying a Shop
DIY vs. Professional: Not Recommended for DIY
This repair is not recommended as a DIY project. Not recommended for DIY. Requires precise timing knowledge. One mistake destroys the engine. The professional rate of $604–$922 is fair for the complexity involved. Attempting this repair without the right training risks damaging other components, costing far more in the end.
5 Ways to Save Money on This Repair
- 1Get quotes from at least 3 shops in Seattle — prices vary by 25–40% between dealers and independents.
- 2Ask specifically if they'll use OEM or aftermarket parts. Aftermarket is fine for most components except timing belt on luxury brands.
- 3Check if your extended warranty or car insurance covers this repair — some aftermarket warranties cover timing belt.
- 4If your car is near the end of its useful life, compare repair cost ($604–$922) against the vehicle's value.
- 5Combine this repair with other deferred maintenance to save on labor — shops often discount when doing multiple jobs at once.
Frequently Asked Questions
Compare prices before you commit
Use RepairPal or YourMechanic to get 3 quotes from certified shops in Seattle in under 2 minutes.
Disclaimer: Cost estimates are based on national parts pricing databases and regional labor rate surveys. Actual prices vary by shop, vehicle condition, and parts availability. Always obtain a written estimate before authorizing repairs. Affiliate disclosure: links marked with Amazon may earn us a small commission.