IQAuto Repair IQ

2019 Ford Fusion Radiator Replacement Cost in Pittsburgh, PA

Medium
100,000–150,000 miles or 8–10 years
Updated July 2026

If you need a radiator replacement on your 2019 Ford Fusion in Pittsburgh, PA, expect to pay between $476 and $726 at a local shop. That breaks down to $207–$314 for parts and $269–$412 for labor at Pittsburgh's average rate of $108.0/hour. Read on for a full cost breakdown, money-saving tips, and what to watch out for.

Radiator Replacement2019 Ford Fusion in Pittsburgh, PA

$476$726

Estimated total cost at a shop in Pittsburgh

Parts$207–$314

43% of total

Labor$269–$412

57% of total

Time

33.9 hrs

Shop Rate

$108/hr

DIY Saves

~$147

Find the Best Tires at Mavis

Compare tire pricing & book an appointment near you

Get a Quote ->

What's Included in This Repair

  • 1Flush and drain coolant
  • 2Remove radiator hoses and connections
  • 3Remove and replace radiator
  • 4Fill with fresh coolant
  • 5Burp air from cooling system
Typical Lifespan:
100,000–150,000 miles or 8–10 years
Difficulty:
Medium

Warning Signs You Need This Repair

  • Engine overheating warning
  • Green or orange coolant puddle under car
  • Coolant level dropping regularly
  • White steam from under hood

High — driving with a leaking radiator destroys the engine

What Drives the Cost in Pittsburgh?

Labor Market: Pittsburgh, PA

Pittsburgh is a mid-range labor market, with shops charging $108.0–$128.0/hour for labor. For this radiator, you'll pay $269–$412 in labor alone — accounting for approximately 57% of your total bill. Independent shops in Pittsburgh typically run 20–35% cheaper than dealerships.

2019 Ford Fusion Notes

American-made vehicles like the 2019 Ford Fusion benefit from widely available aftermarket parts, keeping costs competitive. Parts for this repair typically run $207–$314 and are stocked by most auto parts stores. The large network of shops familiar with Ford vehicles also keeps labor competition strong.

DIY vs. Paying a Shop

DIY vs. Professional: Save ~$147

Confident DIYers can save $147+ by purchasing parts (≈$329) and doing the labor themselves. Moderate DIY. Main challenge is accessing hose clamps and draining coolant cleanly. Budget 2–3 hours. Budget 3–4 hours and watch a make-specific YouTube tutorial before starting. Always use OBD-II scanner to confirm the diagnosis before buying parts.

Shop parts on Amazon
Affiliate disclosure: Auto Repair IQ participates in the Amazon Associates Program and other affiliate advertising programs. We may earn a commission on qualifying purchases or referrals at no additional cost to you. Learn more.

5 Ways to Save Money on This Repair

  1. 1Get quotes from at least 3 shops in Pittsburgh — prices vary by 25–40% between dealers and independents.
  2. 2Ask specifically if they'll use OEM or aftermarket parts. Aftermarket is fine for most components except radiator on luxury brands.
  3. 3Check if your extended warranty or car insurance covers this repair — some aftermarket warranties cover radiator.
  4. 4If your car is near the end of its useful life, compare repair cost ($476–$726) against the vehicle's value.
  5. 5Combine this repair with other deferred maintenance to save on labor — shops often discount when doing multiple jobs at once.

Frequently Asked Questions

In Pittsburgh, expect to pay $476–$726 total for radiator replacement on a 2019 Ford Fusion. Parts run $207–$314, and labor is $269–$412 (3.0 hours at $108.0/hr).

Compare prices before you commit

Use RepairPal or YourMechanic to get 3 quotes from certified shops in Pittsburgh in under 2 minutes.

Get Quotes →

Disclaimer: Cost estimates are based on national parts pricing databases and regional labor rate surveys. Actual prices vary by shop, vehicle condition, and parts availability. Always obtain a written estimate before authorizing repairs. Affiliate disclosure: links marked with Amazon may earn us a small commission.