2020 GMC Acadia Catalytic Converter Replacement Cost in Minneapolis, MN
If you need a catalytic converter replacement on your 2020 GMC Acadia in Minneapolis, MN, expect to pay between $987 and $1497 at a local shop. That breaks down to $740–$1119 for parts and $247–$378 for labor at Minneapolis's average rate of $116.5/hour. Read on for a full cost breakdown, money-saving tips, and what to watch out for.
Catalytic Converter Replacement — 2020 GMC Acadia in Minneapolis, MN
Estimated total cost at a shop in Minneapolis
75% of total
25% of total
Time
2.5–3.3 hrs
Shop Rate
$116.5/hr
DIY Saves
~$-187
What's Included in This Repair
- 1Diagnose using OBD-II scanner
- 2Cut or unbolt failed converter
- 3Install new direct-fit or universal converter
- 4Clear codes and verify O2 sensor function
100,000+ miles in normal conditions
Medium
Warning Signs You Need This Repair
- ▸ Check engine light with P0420/P0430 codes
- ▸ Rattling sound from under car
- ▸ Failed state emissions inspection
- ▸ Sulfur / rotten egg smell from exhaust
- ▸ Noticeably reduced acceleration
Medium — car may still drive but fails emissions; theft is common
What Drives the Cost in Minneapolis?
Labor Market: Minneapolis, MN
Minneapolis is an above-average labor market, with shops charging $116.5–$136.5/hour for labor. For this catalytic converter, you'll pay $247–$378 in labor alone — accounting for approximately 25% of your total bill. Independent shops in Minneapolis typically run 20–35% cheaper than dealerships.
2020 GMC Acadia Notes
American-made vehicles like the 2020 GMC Acadia benefit from widely available aftermarket parts, keeping costs competitive. Parts for this repair typically run $740–$1119 and are stocked by most auto parts stores. The large network of shops familiar with GMC vehicles also keeps labor competition strong.
DIY vs. Paying a Shop
DIY vs. Professional: Not Recommended for DIY
This repair is not recommended as a DIY project. Requires cutting old converter off with a reciprocating saw. Not DIY unless you have a lift and welding capability. The professional rate of $987–$1497 is fair for the complexity involved. Attempting this repair without the right training risks damaging other components, costing far more in the end.
5 Ways to Save Money on This Repair
- 1Get quotes from at least 3 shops in Minneapolis — prices vary by 25–40% between dealers and independents.
- 2Ask specifically if they'll use OEM or aftermarket parts. Aftermarket is fine for most components except catalytic converter on luxury brands.
- 3Check if your extended warranty or car insurance covers this repair — some aftermarket warranties cover catalytic converter.
- 4If your car is near the end of its useful life, compare repair cost ($987–$1497) against the vehicle's value.
- 5Combine this repair with other deferred maintenance to save on labor — shops often discount when doing multiple jobs at once.
Frequently Asked Questions
Compare prices before you commit
Use RepairPal or YourMechanic to get 3 quotes from certified shops in Minneapolis in under 2 minutes.
Disclaimer: Cost estimates are based on national parts pricing databases and regional labor rate surveys. Actual prices vary by shop, vehicle condition, and parts availability. Always obtain a written estimate before authorizing repairs. Affiliate disclosure: links marked with Amazon may earn us a small commission.