2019 BMW 5 Series Catalytic Converter Replacement Cost in Sioux Falls, SD
If you need a catalytic converter replacement on your 2019 BMW 5 Series in Sioux Falls, SD, expect to pay between $1353 and $2051 at a local shop. That breaks down to $1063–$1608 for parts and $290–$443 for labor at Sioux Falls's average rate of $91.0/hour. Read on for a full cost breakdown, money-saving tips, and what to watch out for.
Catalytic Converter Replacement — 2019 BMW 5 Series in Sioux Falls, SD
Estimated total cost at a shop in Sioux Falls
78% of total
22% of total
Time
2.5–3.3 hrs
Shop Rate
$91/hr
DIY Saves
~$-335
What's Included in This Repair
- 1Diagnose using OBD-II scanner
- 2Cut or unbolt failed converter
- 3Install new direct-fit or universal converter
- 4Clear codes and verify O2 sensor function
100,000+ miles in normal conditions
Medium
Warning Signs You Need This Repair
- ▸ Check engine light with P0420/P0430 codes
- ▸ Rattling sound from under car
- ▸ Failed state emissions inspection
- ▸ Sulfur / rotten egg smell from exhaust
- ▸ Noticeably reduced acceleration
Medium — car may still drive but fails emissions; theft is common
What Drives the Cost in Sioux Falls?
Labor Market: Sioux Falls, SD
Sioux Falls is a below-average labor market, making repairs more affordable than in coastal cities, with shops charging $91.0–$111.0/hour for labor. For this catalytic converter, you'll pay $290–$443 in labor alone — accounting for approximately 21% of your total bill. Independent shops in Sioux Falls typically run 20–35% cheaper than dealerships.
2019 BMW 5 Series Notes
European luxury brands like BMW use proprietary parts with tighter tolerances, which drives parts costs significantly higher than domestic or Japanese vehicles. For the 2019 BMW 5 Series, OEM parts alone can cost $1578–$1688. Always use a BMW-certified technician or a reputable independent Euro-specialist to avoid voiding any remaining warranty.
DIY vs. Paying a Shop
DIY vs. Professional: Not Recommended for DIY
This repair is not recommended as a DIY project. Requires cutting old converter off with a reciprocating saw. Not DIY unless you have a lift and welding capability. The professional rate of $1353–$2051 is fair for the complexity involved. Attempting this repair without the right training risks damaging other components, costing far more in the end.
5 Ways to Save Money on This Repair
- 1Get quotes from at least 3 shops in Sioux Falls — prices vary by 25–40% between dealers and independents.
- 2Ask specifically if they'll use OEM or aftermarket parts. Aftermarket is fine for most components except catalytic converter on luxury brands.
- 3Check if your extended warranty or car insurance covers this repair — some aftermarket warranties cover catalytic converter.
- 4If your car is near the end of its useful life, compare repair cost ($1353–$2051) against the vehicle's value.
- 5Combine this repair with other deferred maintenance to save on labor — shops often discount when doing multiple jobs at once.
Frequently Asked Questions
Compare prices before you commit
Use RepairPal or YourMechanic to get 3 quotes from certified shops in Sioux Falls in under 2 minutes.
Disclaimer: Cost estimates are based on national parts pricing databases and regional labor rate surveys. Actual prices vary by shop, vehicle condition, and parts availability. Always obtain a written estimate before authorizing repairs. Affiliate disclosure: links marked with Amazon may earn us a small commission.